- The gimbal protection is activated because the gimbal cover was not removed.
                           → Ensure the gimbal cover is removed before powering on.

- The drone is not placed on a level surface.
                           → Place the drone on a level surface before turning it on and wait for the gimbal to complete its self-check.

- The drone is in compass calibration mode.
                           → The gimbal does not function during compass calibration. After calibration, place the drone on a level surface and wait for the gimbal to stabilize and re-center.

- The drone is placed on uneven ground (e.g., grass or sand).
                           → Position the drone levelly on a landing pad or move to a flat surface. Make sure there is space beneath the gimbal and no obstacles that could affect stabilization.

- GPS signal instability due to flying near buildings or obstructions.
                           → Operate the drone in open areas free from obstructions.

- Compass interference.
                           → 1. Manually land the drone and recalibrate the compass.
                           → 2. Try flying in a different location away from buildings, power lines, and towers.

- Propellers are deformed or damaged.
                           → Replace with new propellers.

- Signal interference from buildings, towers, or power lines.
                           → Fly in open areas away from potential obstructions to reduce interference.

- Transmitter and mobile device are not properly aligned with the drone.
                           → Ensure they are facing the drone’s direction to improve signal strength.

- Aggressive joystick movement during flight.
                           → Use slow and steady joystick controls to maintain stable transmission.

- Phone is running background apps or having performance issues.
                           → Close unused apps to optimize device performance during flight.